Product Details:
Payment & Shipping Terms:
|
| Color: | White | Voltage: | DC5V |
|---|---|---|---|
| Power: | 0.12W | Waterproof: | IP68 |
| Products Diameter: | 9mm | Cable Length: | 8cm |
| Usage: | Decoration Lightings | Warranty: | 3 Years |
| Paypal: | T/T,Paypal,Western Union | Product: | Led Lamparas Pixel |
Specifications:
| Product Name | 9mm LED pixel light |
| Product Size | 9m diameter |
| Hole size | 9mm diameter. |
| Voltage | DC 5V /12V |
| Power | 0.15W |
| Working Currency | 20mA |
| Bean Angle | 180° |
| Material | PVC |
| IP Rate | IP68 |
| Working temperature | -45℃~+70℃ |
| Warranty | Three Years |
| Package | 50pcs/string, 1000pcs/pcakge, 6000pcs/cuton |
| Emitting Color | Red, Yellow,Blue,Green,White,Voilet, RGB,Fullcolor. |
| Application | Outdoor Decoration Lightings ,advertising letters,Name board, building and stage decoration. |
Pictures:
![]()
![]()
![]()
![]()
![]()
Feature:
IP68 Waterproof for outdoor advertising signs
9mm small size, perfect for channel letter backlight
Low voltage, safe & energy saving
High brightness, consistent lighting
Cuttable at designated points, flexible layout
Easy wiring, fast installation
Multi-color optional, CE RoHS approved
Factory wholesale for signage projects
Driver select and installation:
1. Do not bend the lamp bead body sharply. Sharp bending will damage the internal LED chip.
2. Arrange the power supply reasonably. Do not overload the power adapter; overloading will cause unstable brightness or lamp damage.
3. Keep the installation position away from high-temperature heat sources. High temperature will shorten the service life of LED pixels.
4. Do a full lighting test before sealing the advertising letter box. Confirm all pixels light up normally before closing the letter shell.
5. Use insulated tape or waterproof glue to protect wiring terminals for outdoor projects, to prevent short circuit caused by water ingress.
6.Connect ways: When connect the string with driver, pls keep the beging and the end contacted with the main wire . and main wire must be 2.5 mm2 .
Pls check the picture as below:
![]()
Package:
![]()
Application pictures:
![]()
![]()
Q: What should I pay attention to when installing these 9mm LED pixel lights?
A: ① Only cut at the marked cutting points.
② Never connect the pixels directly to high voltage.
③ The lamp body is IP68 waterproof, but wire joints need extra waterproof sealing.
④ Test all lights before sealing the advertising letter box.
⑤ Avoid strong pulling of wires and sharp bending of lamp beads.
⑥ Do not overload the power supply and keep away from high-temperature areas.
If you have more questions, Pls contact with me:
Contact : Alice Wang
Email:ledsignage_alice@163.com
Skype:alicewang2027
Whatapp:008613534016771
Website:http://www.mjlightingled.com