5V 12V LED Light Pixels Strings Led Lighting Letters Shop Advertising Banner

Specifications:

• Product Name: led light pixels

• LED Chip: 5mm straw hat led

• Working Voltage: DC5V

• Power: 0.12W

• LED Quantity: 50pcs/string

• IP Rate: IP67

• Color Temperature: Green

• Certification: CE, RoHS

Pictures:

Feature:

1.Produce with Taiwan chip. high lumen, good color purity, lower light dissipation and long lifespan.

2.Compared with traditional lights, LED light has the advantage of energy saving, environment friendly, long lifespan, Stable well, install conveniently, ect.

3.Monocolour achieve the effect of advertising signs keeping lighting state, fullcolor string suitable for advertising sign whose color is changed always, It makes outdoor advertising signs board produced easily and beautiful appearance.

4.Suitable for different material board like Aluminum substrate , stainless steel plate,ect. install conveniently.

5.Every piece is connected with series method, If one is down, Just need to exchang the break one. Much different from the kind that need to exchanged the whole roll sting if there is only 1 pcs gone down.

6.flexiable enough for installation, high strength, High and low temperature resistance,anti ultraviolet, aging-resistant, Waterproof IP68. 

Installation Notes

1. Check all LED pixels for damage before installation. Do not use any lamps with broken shells or exposed wires.

2. This LED pixel works at low voltage. Do not connect to high-voltage mains directly, otherwise the lights will burn out immediately.

3. Cut the string only at the marked cutting points. Cutting at other positions will damage the circuit and make the pixels non-functional.

4. Keep the wiring joints sealed well after connection. Even though the lamp body is IP68 waterproof, the splice joints are not waterproof without sealing.

5. Avoid pulling or stretching the wires violently during installation, which may cause internal wire breakage and light failure.

Connect ways

When connect the string with driver, pls keep the beging and the end contacted with the main wire . and main wire must be 2.5 mm2 .

Pls check the picture as below:

Package:

Application pictures: 

Notice:

1.Pls confirm the dirver is DC5V output.

2.The wire connected with driver shouldn’t be less than 2.5 mm2,If the quantity is big,the wire should be more thicker.

3.Pls make sure of the positive and negative of the string, usually the negative is white.

4.Pls hold the middle of the sting with moderate strength and keep it from being damaged.

FAQ

Q1: What is this 9mm LED pixel light used for?

A: It is mainly applied for advertising letter signs, channel letters, logo backlighting, store front signage and small outdoor illuminated signs.

Q2: Is this LED pixel waterproof? What is the IP rating?

A: Yes, it is IP68 waterproof. It can work normally outdoors under rainy weather, suitable for exterior advertising signs.

Q3: What voltage does this 9mm LED pixel use?

A: It adopts low voltage design, safe to use. Please confirm the working voltage before installation.

Q4: What color options are available?

A: We have green, red, blue, white, yellow and other colors for selection. Custom color is also available upon request.

If you have more questions, Pls contact with me:
Contact : Alice Wang
Email:ledsignage_alice@163.com
Skype:alicewang2027
Whatapp:008613534016771
Website:http://www.mjlightingled.com