Semioutdoor RED P10 LED Display Modules 320*160mm 32*16 Pixels Public Information Display
 

Specification

- Product Name: P10 LED Display Modules

- Model: MJ-P10-Semi-DIP-Red

- Pixel Pitch:  P10 

- LED Type: SMD 3in1 lamp beads

- Panel Size: 320*160mm

- Brightness : ≥2000cd/m2

- Viewing Angle: Level:90°-130°; Up:30°-45°; Down:10°-20°

- Scan: 1/4 scan

- Working Voltage: DC5V

- Structure: Lamp & driver integrated PCB, front side with LED beads, back side with SMD IC chips

 
Pictures:
 

Installation Notes

1. Cut off power supply before installation. Never operate with power on.

2. Check each LED module for damage, scratches or lamp bead failure before assembly. Do not use defective modules.

3. Protect the lamp surface. Avoid scratching the mask and lamp beads with hard tools.

4. Calculate power load reasonably. Do not overload the power supply to avoid unstable brightness or module burnout.

5. Do not install in environments with strong corrosive gas.

6. Complete full lighting test before sealing the screen frame, confirm all modules display normally.

7. During transportation and installation, modules wrapped by protective film can prevent surface damage; remove film after installation.

Applications

• Suitable for various outdoor projects:

• Building exterior wall large LED display screen

• Government & cultural square advertising screen

• Roadside upright advertising billboard

FAQ

Q1: What is this SMD LED module used for?

A: It is outdoor full color LED display module, widely used for building exterior screen, square billboard, roadside upright advertising and other outdoor commercial display projects.

Q2: Is this LED module waterproof?

A: The lamp face is filled with double-component waterproof glue, and IC side is sprayed with three-proof silicone. It reaches IP65 for front side, suitable for outdoor use. But connectors need extra waterproof sealing.

Q3: What does lamp-driver integrated PCB mean?

A: LED beads are on the front of PCB, and the driver IC chips are mounted on the back. This design makes the module thinner and easier for splicing.

Q4: Will there be mosaic or grid effect after splicing?

A: Our self-developed mask has good flatness. With correct installation, it can hide splicing seams perfectly without grid or mosaic phenomenon.